HOT AIR GENERATORS FOR HEATING SPORT CENTERS

HOT AIR GENERATORS

Machines for professional heating of pressostatic covers and tensile structures in sports facilities

Sport does not stop, even in the coldest months of the year: in winter sports are practiced indoors and it is essential to ensure the perfect temperature for athletes and sportsmen who train and / or have fun.

Tennis courts, five-a-side football, volleyball and basketball courts, swimming pools, hockey rinks, equestrian centers, gyms and multifunctional structures are some of the most popular places throughout the winter, but there are new ones: for example, there are multiplying the padel facilities.

Heating these spaces is not as easy as it seems, especially since they are often very large rooms, poorly insulated and with sporadic and non-continuous use throughout the day.

BIEMMEDUE meets the needs of all managers of winter sports facilities, with the design and production of solutions and products for professional heating capable of satisfying the demands and needs of every sport. Simple to install and use hot air generators: the installation does not require interventions on the structure and thus allows you to keep intact the flooring of the field, a fundamental component of the game.

Our hot air generators for sports facilities ensure heating at the times when it is needed and at the necessary power: they reach the required temperature very quickly, and then keep it using progressively less and less power. This allows you to give athletes a feeling of warmth in just a few minutes after switching on the system, with minimal movement of air and dust, for a healthy playing environment.

Furthermore, they have affordable and competitive costs compared to any other heating system, which would also be cumbersome or very uncomfortable. These are hot air generators that are installed outside the structure and that convey hot air inside through pre-perforated sheaths usually connected to the ceiling.

Maximum performance with high energy savings

THE RECOMMENDED MODELS

JUMBO - HEAVY DUTY MOBILE SPACE HEATERS WITH AXIAL FAN

$0.00

• Burner cover: protects the burner against blows, dust, water, weather and collect diesel fuel/condensation recovery basin
• Burner is supplied with snorkel jack to ensure clean air combustion through connection with outdoor air uptake duct
• The new heat exchanger with the newly designed higher performance fans ensure heat efficiency of 92 ÷93%
• Better anchorage to the machine’s weight bearing structure through sturdy attachmentrods which allow for muvement on any floors
• Bearing structure with removable panels for interior washing, also in hanging models
• Panels with reinforcement cross pleats to ensure superior rigidity and strength
• Exclusive use of metric screws and inserts for fastening, no self-tapping screws
• Ventilator(IP55):                                                                      

- in conformity with European directives ERP 2009/125/CE target 2015                                                        

 - very low noise fan (noise level≤ 67db at 2 meters) 

- 7-blade fan with high performance (air flow and static pressure) for uniform diffusion of warm airthrough  duct

- fan outlet cone to convey air and ensure high static pressure

• Control rear electrical panel (IP 65):

- located at the top rear of the machine to avoid contact with dust, water,snow

- supplied with a sturdy metal cover to prevent damage and unauthorized access; also handy for storage of tools, papers, etc; 

• Service front electrical panel:

- located at the front of the machine inside the burner cover lid: to prevent contact with dust, water, snow; for easier maintenance; to facilitate controls and maintenance by the operator

• Every main component (fan, burner, thermostats, etc.) is supplied with quick couplings of electrical connections IP68:  

- fast assembly, disassembly and technical maintenance;

- eliminates installation/disassembly mistakes.

Add to cart

TITAN - INDIRECT COMBUSTION HEAVY DUTY MOBILE SPACE HEATERS WITH CENTRIFUGAL FAN

$0.00

• Burner cover: protects the burner against blows, dust, water, weather and collect diesel fuel/condensation recovery basin
• Burner is supplied with snorkel jack to ensure clean air combustion through connection with outdoor air uptake duct
• The new heat exchanger with the newly designed higher performance fans ensure heat efficiency of 96%
• Better anchorage to the machine’s weight bearing structure through sturdy attachment rods which allow for movement on any floors
• Bearing structure with removable panels for interior washing, also in hanging models
• Panels with reinforcement cross pleats to ensure superior rigidity and strength
• Exclusive use of metric screws and inserts for fastening, no self-tapping screws
• Protection cap of combustion chamber exhaust in plastic material with retention chains guards
• .Ventilator (IP 55):

- very low noise fan (noise level ≤ 69db at 2 meters)
- high output, high performance fan guarantees increased
air flow and static pressure (500 Pa) for uniform and long
distance diffusion of warm air through channels or ducts
- fan anchorage on machine’s bearing structure through
sturdy rods
- adjustable fresh air re-uptake shutter

• Control rear electrical panel (IP 65):

- located at the top rear of the machine to avoid contact
with dust, water, snow
- supplied with a sturdy metal cover to prevent damage
and unauthorized access; also handy for storage of tools,
papers, etc;

• Service front electrical panel (IP 65):

- located at the front of the machine inside the burner cover
lid: to prevent contact with dust, water, snow; for easier
maintenance; to facilitate controls and maintenance by
the operator

• Every main component (fan, burner, thermostats, etc.) is supplied with quick couplings of electrical connections:

- fast assembly, disassembly and technical maintenance
- eliminates installation/disassembly mistakes

Add to cart

PHOEN - INDIRECT COMBUSTION PORTABLE HEATERS WITH TWO STAGES BURNER

$0.00

• BM2 dedicated burner, separated from the ventilator
• Power selector: 1° stage (75 kW), 2° stage (110 kW)
• Set ti be connected to a thermostat or a humidistat or a timer
• Power cord (1,5 m) with plug
• AISI 430 stainless steel combustion chamber with four smoke revolutions
• Ventilation thermostat: controls the switching off of the fan only when the combustion chamber is hot/cold
• Electronic flame-control 
• Safety thermostat, limit thermostat
• Fuel feed lines in hydrocarbon resistant rubber, whit a reinforced metal sheath
• Bayonet-type fuel tank cap
• Fuel tank drain plug 
• Dedicated switch to swap from Winter Heating mode to Summer Ventilation mode

Add to cart

SCUDO - BASE FRAMED INDIRECT COMBUSTION SPACE HEATERS WITH CENTRIFUGAL FAN

$0.00

• Base adapted for moving with a fork lift
• Front protective casing with lockable door for burner cover
• Rear protective casing for the centrifugal fan with air intake/aspiration side joint
• Protective base for the upper part with lifting/fastening hooks
• Central lifting hook
• Removable panels for internal washing with reinforcement cross folds to ensure more rigidity and strength
• Exclusive use of metric screws and inserts for fastening, no self-tapping screws
• The new heat exchanger combined with the new higher performance fans, achieve a thermal output of 96%
• Fan protection IP55:

- very silent (noise level ≤ 69 db at 2 meters);
- high output and performances which ensure high air delivery and static pressure (500 Pa) for uniform diffusion and through long distances of warm air through canals or ducts;
- fan anchored to weight-bearing structure through sturdy
beams and fastening brackets;
- adjustable shutter for fresh air restoration;

• Rear electric control panel (IP65):

- situated at the rear of the machine to avoid contact with
dust, water, snow, etc…
- supplied with a sturdy metal cover which can also be used
to stow tools and documents;

• Front service control panel (IP 65):

- situated at the front of the machine, inside the burner cover casing: to avoid contact with dust, water, snow; for easier maintenance; for more convenient control and intervention operations

Add to cart

WHY CHOOSE BIEMMEDUE?

We are a company that has been operating in the field for over 40 years, becoming a point of reference in the world of emergency heating. We take care of the design, production and sale of each generator through advanced and cutting-edge design technology.

• SAVINGS: BIEMMEDUE hot air generators work directly after switching on: assembly is not necessary

• MADE IN ITALY: 100% made in Italy production system with the most rigorous control, quality and safety procedures at every stage

• ENERGY: choice between different energy sources according to your personal needs: gas, diesel, electricity

• CONTROL: possibility of controlling the hot air generator via a thermostat to minimize overheating and consumption

  Biemmedue supports you before, during and after the sale

  The training and technical assistance service offered, thanks to an excellent internal organization and a high level of competence, ensures each customer a direct line for the installation, commissioning and maintenance of all hot air generators for the emergency heating, as well as the possibility of RENTING the hot air generator that best suits your needs.

---

ASK FOR MORE INFORMATION